THRUST MARITIME

Sea State Explorer

Loyal wave climate: wave height statistics, swell and 100-year Hs

Loyal lies west of Shetland at 60.41° N, 4.07° W. This page sets out its wave climate: wave statistics by month from the hindcast record. The average significant wave height over the year is 3.0 m. Significant wave height there exceeds 2 m about 69% of the time across the whole year, roughly 21 days a month on average. The roughest month is January, with a mean significant wave height of 4.3 m and seas above 2 m about 95% of the time. The calmest is July, with a mean of 1.7 m and about 27% of the time above 2 m. Waves above 4 m occur about 23% of the time. The 100-year significant wave height is about 14.4 m.

Open this location in the explorer

Average and exceedance wave height by month

Mean significant wave height and the percentage of time the significant wave height is above each level, by calendar month. The last row combines the months weighted by their length in days.

MonthMean Hs (m)% above 1 m% above 1.5 m% above 2 m% above 2.5 m% above 3 m% above 4 m
January4.3100%99%95%88%77%52%
February4.2100%99%94%86%74%49%
March3.7100%98%91%80%65%36%
April2.899%91%73%53%36%15%
May2.195%74%48%27%15%4.6%
June1.892%62%34%17%7.3%1.7%
July1.788%54%27%13%5.2%1.0%
August1.992%63%34%17%8.3%2.3%
September2.698%87%65%45%29%11%
October3.2100%96%84%68%50%23%
November3.6100%97%91%79%63%33%
December4.0100%98%93%85%73%45%
Year3.097%85%69%54%42%23%

Wind at 10 m across the year: typically 9.0 m/s (17 kn), top 10% above 14.6 m/s (28 kn). Monthly means run from 6.7 m/s in July to 11.0 m/s in January.

Weather windows: a typical month fits about 7.8 separate 24 h periods with significant wave height below 2 m, fewest in January (about 0.9). Periods do not overlap, so a 30 day month holds at most 30.

Nearest mapped asset to the data point: Loyal, oil and gas field, about 498 m water depth, 4 km away. Source: Global Oil & Gas Extraction Tracker, Global Energy Monitor (CC BY 4.0). Positions are indicative unit centroids.

Extreme waves and swell

Return periodHs (m)90% range (m)
1 year10.9n/a
10 years12.111.4 to 12.8
50 years13.712.5 to 14.9
100 years14.413.1 to 15.7

Biggest sea state in the record (1980 to 2022): 13.2 m on 4 February 2013.

In each year's biggest seas, typically: peak period 15.8 s, zero-crossing period 11.3 s, swell 2.2 m.

Highest single wave in a 100-year storm: about 27.4 m (1.9 times Hs, DNV-RP-C205 3.7.3.5).

100-year Hs by season: December to February 14.4 m, March to May 11.6 m, June to August 8.8 m, September to November 12.4 m.

Swell: mean 2.1 m, wind sea 1.4 m. Swell is above 1 m 84% of the time, and 15% of the time with a mean period of 12 s or more.

Gumbel fit to the yearly maxima (DNV-RP-C205 3.6.2.4). The 90%% range is the sampling error of the fit. The hindcast smooths out the peaks of tropical cyclones and the most intense storms, so values there are likely low. These are statistics for planning. They are not design values. See what a 100-year wave means.

Guides: significant wave height, Tp and Tz, weather windows, wave climate and metocean data. Region: West of Shetland.

Data basis

Data basis: WAVERYS wave reanalysis (Copernicus Marine) and ERA5 wind, 1980-2023, 3 hourly. Data point 60.40° N, 4.00° W (0.2° grid), 4 km from the named position, 128,568 samples. Values are for the nearest grid cell and are not interpolated.

Generated using E.U. Copernicus Marine Service Information: WAVERYS global wave reanalysis [1980-2023], 3 hourly significant wave height, peak period and direction. Wind statistics from the ERA5 reanalysis (Copernicus C3S) on its 0.5 degree grid (wind, direction rose, diurnal cycle and ENSO split 1980-2024). Neither the European Commission nor ECMWF nor Mercator Ocean is responsible for any use of this information.

How the numbers are made: How it works. Other locations: all location pages.

Planning a subsea lift?

Weather windows decide when a lift can go. Thrust Maritime provides specialist lifting solutions for subsea operations.

Talk to us at thrustm.com

Follow us on LinkedIn